banner

Carbon Sulfur Analyzer CS-580A

Mã sản phẩm:

ELTRA‘s CS-580A is the ideal analyzer for the simultaneousdetermination of carbon and sulfur in organic samples.  

ELTRA’s 580A analyzers (A = Autoloader) are equipped with an automatic sample loader, allowing for analysis of large numbers of samples without operator intervention. The sample loader is available in two versions to accommodate 36 or 130 crucibles. The CS-580A is based on the technology of the CS-580 analyzer and features a vertical resistance furnace with ceramic tube. 

The temperature can be set in steps of 1 °C to a maximum of 1,550 °C. Thanks to sample weights of up to 500 mg and more even inhomogeneous materials can be reliably analyzed. The analyzer can be equipped with up to four independent infrared cells according to the user’s requirements, allowing for a great variety of applications.

Application Examples

ashes, building materials, coal, coke, gypsum, limestone, oil, plant materials, rubber, sand, soils, soot, tobacco, waste, ...

Product Advantages

Simultaneous carbon and sulfur determination with minimal sample preparation

wide range of organic materials can be analyzed

rapid, precise, accurate and reliable element determination

resistance furnace can be set up to 1550 °C in steps of 1 °C

customized infrared cells provide wide, dynamic measuring range

due to gold IR path, increased cell live time for analysis of halogen or acid containig samples

powerful software (multilingual, customized display, export of results)

single and multipoint calibration

low maintenance

robust design allows usage in production control and laboratory

Tìm Kiếm
 
Hỗ trợ trực tuyến
ngocnu13
 

Features

 

 

Measured elements

carbon, sulfur

Samples

organic

Furnace alignment

vertical

Sample carrier

ceramic crucibles

Field of application

agriculture, biology, chemistry / plastics, coal / power plant, construction materials, environment / recycling, medicine / pharmaceuticals

Furnace

resistance furnace (ceramic tube), adjustable up to 1550 °C (steps of 1 °C)

Detection method

solid state infrared absorption

Number of IR cells

1 - 4

Material of IR path

gold

Typical analysis time

60 - 120 s

Chemicals required

magnesium perchlorate, sodium hydroxide

Gas required

oxygen 99.5 % pure (2 - 4 bar / 30 - 60 psi)
compressed air (4 - 6 bar / 60 - 90 psi)

Power requirements

230 V, 50/60 Hz, max. heat up current 2000 W

Dimensions (W x H x D)

55 x 100 x 60 cm (analyzer)
85 x 35 x 45 cm (Autoloader for 130 crucibles)

Weight

~ 90 kg (analyzer)
~ 15 kg (Autoloader for 130 crucibles)

Required equipment

balance (resolution 0.0001g), monitor, PC

Required accessories

Autoloader (for 36 or 130 crucibles)

Optional accessories

TIC module, voltage stabilizer 5 KVA

 

 

Function Principle

 

 

Operation CS-580A

In the CS-580A the samples are weighed into crucibles. Then a gripper places the samples from the Autoloader on the pedestal. The samples are loaded consecutively into the furnace for combustion. The average analysis time is 60 to 120 seconds. Detector signals and instrument parameters are displayed during analysis. Evaluation of the signals and display of the results are done automatically; the data can be transferred to a laboratory information management system (LIMS). The analyzers require minimum maintenance. The particle filters and chemicals which need to be maintained are easily accessible.

Measuring Principle CS-580A

In the CS-580A analyzers the sample is burnt in an oxygen atmosphere at temperatures of up to 1,550 °C. The furnace temperature can be freely selected in steps of 1 °C. The combustion gasses (CO2, H2O, SO2) coming from the furnace pass through a dust filter. After the water vapor is chemically absorbed, the dried CO2 and SO2 gas is detected in the additional infrared cells. Depending on the configuration, it is possible to combine up to four infrared cells with different sensitivities.

 

Subject to technical modifications and errors


 
Trụ sở chính TP. HCM:
445 Tô Hiến Thành, P. 14, Quận 10 - Tp.HCM
Điện thoại: (028) 38646051 - 38646116 - 38660978 - 38665363
Fax: (028) 386 444 61
Email: mtse@mythanh.com
MST: 03 00 972 905
Văn phòng ĐD tại Hà nội:
Số nhà 33, Ngõ 87, Đường Nguyễn Phong Sắc, Cầu Giấy, Hà Nội
Fax: (024) 3565 9336
Điện thoại: (024) 3565 9335